Macrosystem Bogart SE Ver.2 User manual Bedienungsanleitung PDF herunterladen (Seite 22)

100

Chapter 4

These options can be activated (mark box) if you wish to

power up (and down) the unit using the optional remote. The

remote can also be used to partially operate the entire system.

(9) The `Storyboard options´ button is used to select the type of

editing method: Storyboard or Timeline.

To use the `Timeline´ method, you require a VGA or DVI resolu-

tion of at least 1024x768 pixels. A video monitor is not suit-

able for Timeline editing. Before you activate the Timeline, it

is essential that you select a suitable screen resolution. Go to

System Settings > Storyboard options:

Storyboard - mode: This switches between the Storyboard and

Timeline display. The Timeline method gives you two options:

Either `Timeline´ for using the Timeline in all menus, or `Timeline

(only audio)´ for using the Timeline only in the audio mix screen.

Storyboard - video: You can display a text in a scene or you

can have an image (frame) shown at the start and end of a

video scene segment. If you opt for the image, you can also

select a size (small, middle, large). The images have priority

over the text so in some cases, the text may be overlapped by

the image.

Storyboard - insert: You can make the same settings that are

possible for the video track. In addition, you can also deacti-

vate the insert track altogether, if you don't need it.

Storyboard - colour change: This button activates an alterna-

tive scene display for the video track. If you activate this op-

tion, scene will also be displayed in differing tones of blue, in

addition to the yellow separation line.

(10) Click the selection button `language´ to open a separate

menu with items to select. Select the desired language and the

switch takes place immediately.

(11) The "Keyboard" button is used for selecting a speciﬁc

keyboard language layout on an external keyboard.

The "As language" setting automatically uses the same setup

deﬁned under "Language". You can of course also set it to a

different keyboard as speciﬁed by the interface language.

(12) The “Backup/Restore Archives” function allows you to

store saved data archives (colors, title texts, audio-effect com-

binations) to a separate medium and later restore back into the

system. This way, you can access your archives data after a

full re-installation, or you can transfer data to a second unit.

Click onto the `Backup/Restore Archives´ button and a window

will appear – this allows you to choose between `Backup´ and

`Restore´.

Press the `Backup´ button to select a target medium such as

CD/DVD, an external Firewire hard-drive or a USB stick (for

this, you require the Card Drive software). Select one option

and press `Ok´ and you will be asked to enter a name for the

document.

Additionally, here you will see all previously saved documents.

Conﬁrm with `Ok´ and insert/connect (USB stick, Firewire hard-

drive) medium as requested. If you are using an already burned

CD/DVD RW, the system will ﬁrst delete the contained data – it

is not possible to add data to the disc! Then, the CD/DVD will

be burned or the data will be saved to the USB stick or hard-

drive. You can conﬁrm the procedure by pressing “Ok”.

If you decide to perform a “Restore”, you must ﬁrst choose a

`Source´ (CD/DVD, USB stick or external Firewire hard-drive)

and then decide if you wish to `Overwrite existing ﬁles´ (a

check in the box). Once you have opted for a medium and

pressed `Ok´, you will be requested to insert the medium or to

connect the external medium containing the archived data to

your system.

(14) This information ﬁeld displays the OS version and the

device serial number. Click on the information panel brings up

the system information.

(15) Clicking on the menu symbol returns you to the Main

menu. Clicking the right trackball button does the same.

4.2 Project settings

In this menu you make the settings for your current or next

project. This affects, for example, the project name, image

size, and audio settings.

(1) On the upper edge (the "Hard-drive" section) you see the

"Name" button. Clicking on the name-ﬁeld brings up the on-

screen keyboard with which you can enter the desired name

for the hard drive. You can also see (on a suitable system)

which hard drive is currently in the system. This is otherwise

not possible because the label on the hard drive is not visible

when the hard drive has been inserted into the machine.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 99 100

Kommentare zu diesen Handbüchern

Keine Kommentare

Macrosystem Bogart SE Ver.2 User manual Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Macrosystem Bogart SE Ver.2 User manual