Macrosystem Bogart SE Ver.3 Addition to the manual Bedienungsanleitung PDF herunterladen (Seite 10)

changes. The lower half displays the sound envelope. This

allows to apply transitions and other sound volume changes as

you see ﬁt. Details will be described later.

Sound samples that are subject to transition effects are dis-

played differently in the video sound track (4). Here, the transi-

tion between the sound samples is displayed as a diagonal

line. The sound curve display can be switched on or off in the

settings.

6 This button is used to call up the audio settings. In addition

to the existing functions, there is an additional button on the

right for each of the tracks. If it has been activated (checkmark

present), the corresponding sound track will be shown in the

mixing display. If the button is deactivated, the track will not be

displayed.

Switching off the display of individual tracks increases the

display of the others and makes it easier to work with them.

It is therefore advisable to deactivate unused tracks or tracks

on which you are currently not working. Hidden tracks remain

active and will be taken into account when you play or ﬁnalize

your work.

7 The upper part of this output ﬁeld contains information about

the active sample. In addition to the name and the length of

the sample, the sound volume is also displayed, if it has been

changed.

The lower part of the ﬁeld contains also several bits of informa-

tion. This is where you will see the time code during playback,

the position of a sound sample while you are moving it and

when you change the sound envelope, it will contain its level

and position.

Inserting sound samples

Use the button „Insert“ to insert new samples from the bin

(music, comments, noise) in one of the sound tracks.

Click on this button to open the bin. Select a sound sample

and conﬁrm by clicking OK. The window closes and you get a

different pointer: You now no longer only move the red arrow

over the screen, but also a stylized sound sample (The length

and the look do not correspond to those of the selected sound

sample).

When you move the pointer over one of the sound tracks, it will

automatically be activated. When you leave the sound track

area, left or right, the timeline will automatically scroll in the

corresponding direction.

The sound sample can only be inserted in a free spot if you

go to that location and click on the left button. The current

insertion position (left side, arrowhead) is indicated right in the

information ﬁeld.

When you insert a sample, its start will stop against the end

Screen elements

Using a screenshot of the mixing screen, the individual ele-

ments will be described below.

1 Use this button to extend the well-known yellow guide lines

from the video track to the full height of the sound track. They

indicate the start of a scene and improve clarity when ar-

ranging the samples on the various sound tracks. When you

move samples or when you insert samples, the guide lines

are „magnetic“, which makes it possible to position them with

great accuracy - more on this later.

2 Since audio no longer has to be calculated, it is also no long-

er obvious when clipping has occurred in the mixed sound. A

click on this button will test the audio and tell you if clipping

is occurring. If clipping is indeed occurring, a message will

inform you and you will be able to jump directly to the relevant

position on the timeline. You can then deal with the problem

easily. Additionally, areas with clipping will be colored red in

the narrow blue strip on top of the video sound track.

If there are several clipping areas, you can edit these one after

another by repeatedly clicking the test button. If a very long

project has not yet been tested at all, the test can take some

time.

3 There are several buttons next to the sound tracks. In addi-

tion to the existing buttons for selecting tracks (right) and

selecting effects (left), a new button has been added at the left.

It displays a stylized symbol of a speaker. With this button, the

sound of any track can be switched on or off at any time. This

way, you could mute the video sound (temporarily) while you

are concentrating on comment.

Muted tracks are also taken into account when a project is

ﬁnalized (Exporting, DVD burning...). This makes it easy to cre-

ate several different versions (With/without music, German or

English comments...). You should be careful not to accidentally

„forget“ a track.

4 and 5 The individual sound tracks contain sound samples.

The sound samples are shown in the top half of the so-called

sound curve. This is a general indication of the sound volume

1 2 3 4 5 6 7

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Macrosystem Bogart SE Ver.3 Addition to the manual Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Macrosystem Bogart SE Ver.3 Addition to the manual